Skip to main content

Geeklog Installation with pairSIM

Emily Hall
Updated

PairSIM is a software installation manager that makes downloading and managing popular software easy. You can use PairSIM to install Geeklog, a dynamic web content manager. Use Geeklog to set up a site or blog with comment support, spam protection, and more! For more information, check out this What is Geeklog? article.

Warning-Icon-30.png

This tutorial uses PairSIM, which is a web hosting add on. When this add on is enabled, your account is charged a small monthly fee.

 

Geeklog Installation with PairSIM

Follow these steps to install Geeklog using PairSIM.

Choose the tutorial that reflects your ACC interface type: 

Not sure what the difference is? See Which ACC Interface Am I Using? 

If you are using the Legacy Interface:

  1. Log in to the Account Control Center (ACC) at my.pair.com
  2. In the left sidebar, click PairSIM and click Software Installation Manager in the drop-down
  3. If you have not yet enabled PairSIM, do so now by clicking Enable Software Installation Manager
  4. Under “Software Available for Installation,” click the Geeklog link
  5. Enter the required information:
    URL Select the domain name from the drop-down and enter the desired extension in the box.
    Database A database will be created for your Geeklog installation. If you want to name your database, click Advanced Options and then enter the name in the open box.
    Admin E-Mail Enter the email that will be used for admin purposes. Information regarding this installation, such as your Geeklog credentials, may be sent to this address.
    Site Name Enter the name of the site.
    Site Slogan Enter a slogan that will be associated with your site.
 
  1. When finished, click Install Geeklog

    If installed successfully, a page will appear telling you that your Geeklog installation was successful and show some information about your installation.
  2. When finished, click Return to Software Installation Management.

    This will return you to the “Software Installation Manager” interface, which will now show your currently installed software. Geeklog should now be shown in the “Currently Installed Software” section.

If you are using the New ACC Interface:

  1. Log in to the Account Control Center (ACC) at my.pair.com
  2. In the top navigation bar, click Hosting
  3. Click the Software button
  4. If you have not yet enabled PairSIM, do so now by clicking Enable Software Installation Manager
  5. In the “Software Available for Installation” section, find Geeklog and click its Install button
  6. Enter the required information:
    URL Select the domain name from the drop-down and enter the desired extension in the box.
    Database A database will be created for your Geeklog installation. If you want to name your database, click Advanced Options and then enter the name in the open box.
    Admin Email Enter the email that will be used for admin purposes. Information regarding this installation, such as your Geeklog credentials, may be sent to this address.
    Site Name Enter the name of the site.
    Site Slogan Enter a slogan that will be associated with your site.
 
  1. When finished, click Install Geeklog

    If installed successfully, a page will appear telling you that your Geeklog installation was successful and show some information about your installation.
  2. When finished, click Return to Software Installation Management.

    This will return you to the “Software Installation Manager” interface, which will now show your currently installed software. Geeklog should now be shown in the “Currently Installed Software” section.

After Installation

Need some help getting started? Check out these helpful articles:

Powered by Zendesk